COMMENT ⊗   VALID 00002 PAGES
C REC  PAGE   DESCRIPTION
C00001 00001
C00002 00002	.SBTTL	Table of interpreter instructions
C00013 ENDMK
C⊗;
.SBTTL	Table of interpreter instructions

COMMENT  ⊗
This table is parallel to the file INTDEF.SAI[AL,HE].  It is required
at several places in the interpreter; each of these can define the
macro MAKEOP however desired.  The convention here for types of
arguments that each pseudo-op takes is this:
	a	absolute address
	la	list of absolute addresses
	o	offset or level-offset pair
	lo	list of offsets or level-offset pairs
	n	small constant
	r50	word of radix 50
⊗

PCVERSION == 7		;Fix this every time you add some new pcodes

	II == 2		;Start of interpreter jump table (0 is illegal instruction)

	;Motion control
MAKEOP	XMOVE,MOVE,<a>	;Prepare, execute move whose traj table is at a.
MAKEOP	XCENTER,CENTER,<a>,	;Center using traj table at a.
MAKEOP	XSTOP,STOP,<n>	;Cause all mechanisms whose bits are on in n to stop.
MAKEOP	XTFRCST,TFRCST,<n>	;Initializes force system, force frame on stack
				; control bits in <n>
MAKEOP	XVMKFRC,VMKFRC	;Gets vector off stack, makes a force frame along vector
			; and puts it on the stack
MAKEOP	XCOMPLY,COMPLY,<n>	;Sets up compliant motion in next move
				;Gets force magnitude off stack, control bits in <n>
MAKEOP	XCMPOFF,CMPOFF,<n>	;Turns off compliant motion in current move (not used)
MAKEOP	XNOTICE,NOTICE	;Make sure everyone knows where the arm is.

	;Variables
MAKEOP	XMVAR,MVAR,<lo>	;Make graph node for given offsets (list arg)
MAKEOP	XKVAR,KVAR,<lo>	;Kill graph node at given offsets (list arg)
MAKEOP	XGLBLNK,GLBLNK,<lo,r50,r50>
			;Link global given by r50,r50 into level-offset lo.
MAKEOP	XMAKEVT,MAKEVT,<lo>	;Make event variables with offsets as in list.
MAKEOP	XDESEVT,DESEVT,<lo>	;Kill event variables with offsets as in list.
MAKEOP	XMEXP,MEXP,<lo,a,o>	;Make an expression whose needed list is lo
			; at address a, and call it offset o.
MAKEOP	XMCLC,MCLC,<o,o>;Make the expression at level-offset o1 a calculator
			; for the variable at o2.
MAKEOP	XDCLC,DCLC,<o,o>;Unmake the expression at level-offset o1 a calculator
			; for the variable at o2.
MAKEOP	XMCHG,MCHG,<o,a>;Make a changer for variable at level-offset o at address a.
MAKEOP	XGTOLD,GTOLD	;Get the old value for current changer.
MAKEOP	XGTNEW,GTNEW	;Get the new value for current changer.

	;Stack operations
MAKEOP	XGTVAL,GTVAL,<o>;Push value of arg (level-offset pair).
MAKEOP	XIGTVAL,IGTVAL,<a>	;Push arg (immediate).
MAKEOP  XCHNGE,CHNGE,<o>;Pop value into arg (level-offset pair).
MAKEOP  XICHNGE,ICHNGE,<a>;Pop value into arg (immediate).
MAKEOP	XPUSH, PUSH,<a>	;Push arg directly (as a ptr) onto stack. For cnstnts.
MAKEOP	XPOP,  POP	;Pop stack.
MAKEOP	XCOPY, COPY ,<n>;Copy n'th down to top of stack.
MAKEOP	XREPLAC,REPLAC,<n>	;Replace n'th down with top (which pop)
MAKEOP	XFLUSH,FLUSH	;Flush the entire stack.

	;Flow of control
MAKEOP	XJUMP, JUMP, <a>	;Jump to address
MAKEOP	XJUMPC,JUMPC,<a>	;Jump to address if "true"
MAKEOP	XTERMINATE,TERMINATE	;Terminate this interpreter
MAKEOP	XENDCLC,ENDCLC		;Return from calculator cell
MAKEOP  XPROC, PROC,<a,lo>	;Call a procedure at a, with arg list lo 
MAKEOP	XRETURN,RETURN	;Return from procedure
MAKEOP	XSPROUT,SPROUT;la	;Sprout interpreters at each arg, wait (list arg)
MAKEOP	XFORCHK,FORCHK,<a>	;Do a FOR-loop check, and fail to location d.
MAKEOP	XSIGNAL,SIGNAL,<o>	;Signal event at level-offset o.
MAKEOP	XWAITE,WAITE,<o>	;Wait on event at level-offset o.
MAKEOP	XPAUSE,PAUSE		;Pause in seconds (on stack)
MAKEOP	XABORT,ABORT		;Abort current motions
MAKEOP	XDDT,GODDT		;go to DDT.

	;Boolean
MAKEOP	XSLE,SLE	;S≤S  compare top two elts, pop, pop, push answer
MAKEOP	XSLT,SLT	;S<S		true := 1.0
MAKEOP	XSGE,SGE	;S≥S		false:=  0
MAKEOP	XSGT,SGT	;S>S
MAKEOP	XSEQ,SEQ	;S=S
MAKEOP	XSNE,SNE	;S≠S
MAKEOP	XAND,AND	;S∧S  (logical and)
MAKEOP	XLOR,LOR		;S∨S  (logical or)
MAKEOP	XNOT,NOT	;¬S   (logical not) note: this only takes one arg

	;Arithmetic
MAKEOP	XWHERE,WHERE,<n>	;Push the current location of mechanism n
MAKEOP	XSADD, SADD	;S+S:  Add top two elts, pop, pop, push answer
MAKEOP	XSSUB, SSUB	;S-S:  Sub top two elts, pop, pop, push answer
MAKEOP	XSNEG, SNEG	;-S:   Negate top elt, pop, push answer
MAKEOP	XSMUL, SMUL	;S*S:  Mul top two elts, pop, pop, push answer
MAKEOP	XSDIV, SDIV	;S/S:  Div top two elts, pop, pop, push answer
MAKEOP	XVMAGN, VMAGN	;S ← norm of vector
MAKEOP	XVDOT, VDOT	;S ← vector dot vector
MAKEOP	XPVDOT,PVDOT	;S ← vector dot vector all 4 cells
MAKEOP	XSSBRTN,SSBRTN,<n>	;S ← SBRTN[n](top scalar elt)
MAKEOP	XTMAGN,TMAGN	;S ← extracts angle of rotation from trans
MAKEOP	XTAXIS,TAXIS	;V ← extracts axis of rotation from trans
MAKEOP	XVMAKE,VMAKE	;V ← vector(scalar,scalar,scalar)
MAKEOP	XSVMUL,SVMUL	;V ← scalar * vector
MAKEOP	XVADD, VADD	;V ← vector + vector
MAKEOP	XVSUB, VSUB	;V ← vector - vector
MAKEOP	XUNITV,UNITV  	;Vector ← vector / its norm
	;CROSV remove	;Vector ← vector cross vector
MAKEOP	XTVMUL,TVMUL	;Vector ← trans * vector
MAKEOP	XTPOS,TPOS	;Vector ← translation_part_of_trans
MAKEOP	XTORIEN,TORIEN	;T ← rotation_part_of_trans
MAKEOP	XVSAXWR,VSAXWR	;T ← rotation(vector,angle)
MAKEOP	XTMAKE,TMAKE	;T ← trans(rot,vector)
MAKEOP	XTVADD,TVADD	;T ← t + v
MAKEOP	XTVSUB,TVSUB	;T ← t - v
	;FTOF		;T ← INV(t1) * t2  done by TTMUL(TINVRT(t1),t2) in pcode
MAKEOP	XTTMUL,TTMUL	;T ← trans * trans
MAKEOP	XTINVRT,TINVRT	;T ← trans * trans

	;Condition monitors
MAKEOP	XCMMAK,CMMAK,<o,t,a>	;Make a c-m at offset o of type t starting at a
MAKEOP	XCMENBL,CMENBL,<o>	;Enable c-m at level-offset o
MAKEOP	XCMDSBL,CMDSBL,<o>	;Disable c-m at level-offset o
MAKEOP	XCMDEST,CMDEST,<lo>	;Destroy c-m at offset lo (list arg)
MAKEOP	XCMTRIG,CMTRIG		;Trigger the c-m body (use only in checker)
MAKEOP	XCMSKED,CMSKED,<n>	;Sleep for n mills (use only in checker)
MAKEOP	XCMUNCR,CMUNCR		;Start uncritical section
MAKEOP	XCMDONE,CMDONE 		;Ends force/hardware/duration c-m's, if c-m was
				; re-enabled then restarts it, else dismisses it
MAKEOP	XCMFORCE,CMFORCE	;Initialize force sensing - vector & level on stack
MAKEOP	XCMSENSE,CMSENSE	;Initialize hardware sensing
MAKEOP	XCMDUR,CMDUR		;Wait for set time, then start up c-m

	;Initialization
MAKEOP	XPROG,PROG		;Initialize mechanism variables
MAKEOP	XENDP,ENDP		;Clean up mechanism variables

	;Debugging aids
MAKEOP	XPRINT,PRINT	;Type an ASCIZ string on the VT05.
MAKEOP	XVALPRN,VALPRN	;Type a value, whatever type it is, and pop it.
MAKEOP	XVARPRN,VARPRN,<o>	;Type a variable (level-offset), whatever type.
MAKEOP	XBRACE,NOOP	;Bracepoint in the program (break or trace)
MAKEOP	XNOOP,NOOP	;Null operation
MAKEOP	XTOPAL,TOPAL	;Escape to PAL